1) In the C&S 2009 requirements for IEQc5, there is a statement that says "Core & Shell projects that do not have entryway systems cannot achieve this credit." What exactly does that mean?

Hi To achieve this credit we must have won the ieqc8.1 credit? or credits are independent?

Green Power is listed throughout the credit as the total electricity consumption of the building, yet the credit (EAc6) is performing the calculation from table 2-10 in the Energy Model from EAp2,

This project is an academic building on a higher education campus in the United States.

Hello, We have a new construction office building project in which a data center/computer room occupies about 10% of the area, but probably 95% of the load/energy.

We have a project in which the location of the fresh air intake for the garage parking is proposed to be located

Hi, I am working on an office building and the team is considering to include a car wash bay. Would I be able to classify this as process water and exclude it from the WEp1 calculation?

For LEED 2009 (C&S) is it acceptable to use the following surface reflectances - - Walls -80%, Floors-25%, Ceiling - 80%. Is there any guidance on what can be used for these simulations.

Dear All, I need to ensure that in the 60/60 rule, I do not find anything about the maximum indoor temperature during flush-out, please advice if I can maintain any indoor temperature as long as it

LEED language seems a bit loose about what must be considered assembly. I see from previous comments from Jon Clifford that assembly is what is delivered to site "assembled", which makes a lot of