Forum quick links
Will "representative modelling" meet prerequisite/ASHRAE reqs?
CS-2009 EAp2:Minimum Energy Performanceposted by Ward Miller on
The project at hand is ~500,000 sf and contains 4 buildings, each with 2 sub-floors, a ground floor, and between 4 and 11 stories and a district heating source.
Core & Shell Lab building
CS-2009 EAc1:Optimize Energy Performanceposted by Suraj Shah on
We are applying for a CS project which primarily will house research labs.
Service hot-water system
NC-2009 EAp2:Minimum Energy Performanceposted by Luana Bertoletti on
Hi, I have a doubt related to the service hot water system for the baseline building.
how many time takes a PRECERTIFICATION
posted by Ron Dean on
hi, I want to know if somebody can tell how many time takes a review for Precertification for a project with more 300,000sf of gross floor area of the project building?
certificate at the end of the site construction ?
NC-2009 IEQc7.2:Thermal Comfort—Verificationposted by Nicolas MOLLE on
Hello, How does it run with this credit since the owner receives the Leed certificate after the end of the site construction and not one year after ?
Enhanced Cx EP
CS-2009 EAc3:Enhanced Commissioningposted by David Edenburn on
For exemplary performance for a CS project, we can commission the tenant spaces.
Required Signatory SSc5.2-1. Owner/Agent
NC-2009 SSc5.2:Site Development—Maximize Open Spaceposted by Aldo Pazo on
Hello everyone!! Could anyone explain what's required in point Upload SSc5.2-RS1?
DES -option2: virtual rate
CS-2009 EAp2:Minimum Energy Performanceposted by Johannes Gellrich on
Modeling a DES system after Option 2, we got the energy consumption and prices from the DES.
outdoor air rate for kitchens
CI-2009 IEQp1:Minimum IAQ Performanceposted by Adam Targowski on
I would like to ask if there's any requirement regarding outdoor air suplly to a kitchen located in an office area? In ASHRAE 62.1-2007 Table 6-1 a kitchen is not mentioned.
SHGC vs U-factor
CS-2009 EAc1:Optimize Energy Performanceposted by Alex AC on
Hi everybody! I´m looking at several glass options for a building project and I want to make sure I pick the most cost-effective and energy efficient options available to me.