Hello, I am going to be modeling an existing building for 2009 NC and we are adding a large data center to an interior space on the top floor of this building.

I have wood caseworks with bamboo veneer on it which are specified under Div. 11. I assume since this is under Div.

Is the gymnasium and kitchen in a school considered a regularly occupied space?

Hi All For a C&S project there are default FTE occupancy figures that shoudl be used for water calcs, bicycle racks etc where the final occupancy is not known.

in the project we are modelling, hot water system is preheated from the building power generators by using recovery system isntalled on the genertars ( same principle of the recovery chillers) but

hello as my project is outside of U.S, getting certification of NFRC is very difficult. in this contry has a similar test certification that comply with ASTM and this conutry reconized BUT it is no

I was reviewing the LEED addenda and noticed an interesting one for this credit.

I m modeling a 52 floor building and 2 detached retails buildings,The proposes system are chilled water system with FCU except : 1-8 floors core and shell ( m0re than 78000 sqft) 2- G+2floors

how do you deal with a phased master plan? initially create the Master Site to encompass all future phases? or create Master Site each time a new phase starts?