I'm trying to figure out the exhaust airflow rates required for chemical pollutant source rooms in a hospital (e.g. janitor's closets, copy rooms, etc.).

I would like to do the exam LEED AP and I have a very specific question : FOR A PREVIOUSLY UNDEVELOPED SITE, WHAT WATER BODIES DO NOT HAVE TO MEET THE 50-FOOT SETBACK CRITERIA TO COMPLY SUSTAINAB

The building has entryway grates a few feet in length in the vestibule of all building entrances.

Dear experts, we are purchasing the PVC floor adhesive, but i'm not sure which category is more suitable for this kind of adhesive in leedonline form, we considered "Rubber Flooring Adhesives" but

We are working on a project that has a fancoil located on the top of the building that will treat the outdoor air and deliver it to each non densely occupied zone.

I'd like to confirm that if a project is pursuing EQc5, that they must use MERV 13 filters for flush-out but can still use MERV 8 filters on equipment that is operated during construction.

We have a project that is using CSI MasterFormat 1995, instead of 2004.

Does anyone have any experience with having a large informal waiting space outside of classrooms and determining a transient load.

Sould all kind of elevator motors comply with the requirements of Chapter 10.