Hi, I'm hoping to get some feedback on what is actually required to be uploaded in support of table 4-1.

In the EAp2 and EAc1.4 for LEED CI v2009, you established that projects may include only new equipment and appliances purchased for the LEED-CI scope of work in the list for Energy Star rated equip

Hi all, Is it possible to use the refrigerant R-1234 (HFO) to replace the R-134 in a centrifugal chiller? It has low GWP (around 4 or 5) and zero ODP, but it is not in the LEED online form nor in

For a project located outside US, should the VOC content of a paint or coating not tested as per SCAQMD or Green Seal or CARB Standards be included in the VOC budget method?

I am in the process or completing IEQc10 credit form. The credit form lists a required upload as "Upload IEQ10c10-1.

Hello, Our company has a Project (in Santiago Chile) and we have a question about the additional requirement calculation for CS Core and Shell Credit 6, Green Power. The credit says that gross SF f

We have already been awarded EAc2.1 and EAc2.2. To get these points we did a retro commissioning report. When we resubmit, we are considering going for EAc2.3.

We have a project with 3 buildings located on the same plot, that are physically attached by two underground levels made up of technical rooms, parking spaces, bicycle racks, showers and garbage ro

Hi to all: At the end of the project and after the leed design submittal was reviewed and approved, we found that some of the equipment that have been installed in our project are less efficient t