We are currently working on a project with a large amount of storefront glazing and I'm curious if anyone has sucessfully utilized the University of California's program WINDOW 5 to determine the...

Has anybody grouped room types for Table IEQp3-1? I am trying to understand exactly how to do this. Simplified scenario: The project has 10 small 100 SF rooms, exactly the same. Do I list the...

OK...so I feel kind of dumb asking this question because it seems like I should be able to figure out the answer from the 2009 User Guide but of course it's clear as mud so I humbly ask for...

I am looking at trying to reach the 90% requirement on IEQ6.1. This point is written as an office space, so would I be able to count resident rooms as 'occupied spaces' where each space is...

We are going to build an office space (5000ft2) within an industrial plant and will renovate completely and existing office building attached tho the industrial plant. The office space will use...

Hello,

We are currently preparing a daylight simulation on a shopping malls. The retail stores are tenanted areas and are therefore excluded from the simulation. However, can we consider...

We have an unusual case in an airport project I am working on. It is LEED-CI as we are refurbishing a passenger concourse and some of the back-of-house spaces that go with it. There are 11...

Hello everyone!

I am pretty new at LEED, and I am working on a building in urban areas that will earn SS credit 2. Credit Requirements specifies that "pedestrian-oriented hardscape areas...

Thank you for your comments. I have gone to USGBC and into the My Account section and looked in Personal Information, Membership, Accreditation, etc. and still cannot find it. I can find one...

I have a technical question about LEED Online and inputting information into the Adobe Form for IEQp1. The issue I am having is the amount of time required to document a building that has several...