Forum

Forum » Credit Forums

Topic	Replies	Recent
EA Prereq 2- precertification form CS-2009 EAp2: Minimum Energy Performance posted by Adam Targowski* on Aug 2, 2011, 7:12 am* In the precertification form for EA Prereq 2 Minimum Energy Performance after selection of the appropriate compliance path (which in my case is Whole building energy simulation) there is another...	0
75% Whole Building Reuse Pilot-Credits PC19: Whole Building Reuse posted by Bradley Guy* on Aug 1, 2011, 5:19 pm* Hello Heather, To answer your questions - 1. Yes that is correct this is the total of structural and non-structural assemblies and components as defined by each in MRc 1.1 and 1.3....	0
Equipments to be commissioned NC-2009 EAp1: Fundamental Commissioning of Building Energy Systems posted by Alvaro Valdivia* on Jul 31, 2011, 2:54 am* Hi: I have a boubt about the water heating equipment to be commissioned. In a production plant there are two boilers (water heating and steam), and heat recovering (to heat water) from three... Last reply: Scott Bowman, Aug 1, 2011, 10:19 am	2	Scott Bowman LEEDuser Expert LEED Fellow Integrated Design + Energy Advisors, LLC Mon Aug 1, 2011, 10:19 am
Information: Regional Priority Credit on International Projects? CI-2009 EAc1.2: Optimize energy performance - lighting controls posted by Raymond Loo* on Jul 28, 2011, 9:53 pm* My understanding is that an extra Regional Priority Credit can be earned on international projects here. Does anyone have any details to the actions required to get this RPC point? Last reply: Raymond Loo, Jul 29, 2011, 10:15 pm	4	Raymond Loo LEEDuser Basic Member Senior Manager, Corporate Services MEA & Associates Limited (Hong Kong) Fri Jul 29, 2011, 10:15 pm
5% Requirement Clarification EBOM-2009 WEc3: Water Efficient Landscaping posted by Marie Gruel* on Jul 29, 2011, 1:20 am* I have a zero lot line project,... Last reply: Tristan Roberts, Jul 29, 2011, 1:21 pm	1	Tristan Roberts LEEDuser Expert Representative Vermont House of Representatives Fri Jul 29, 2011, 1:21 pm
Case 2 Site with little decrease in Impervious Ratios NC-2009 SSc6.1: Stormwater design - quantity control posted by ryan mclean* on Jul 5, 2011, 11:14 am* I am in the processing of accessing the feasibility of attaining this credit with a site that is currently 88% impervious and the proposed site is roughly 81% impervious. While i will be able to... Last reply: Susann Geithner, Jul 29, 2011, 10:44 am	1	Susann Geithner LEEDuser Basic Member Principal Emerald Built Environments Fri Jul 29, 2011, 10:44 am
Exempt compounds NC-2009 IEQc4.2: Low-emitting materials - paints and coatings posted by Paola Figueiredo, Newton Figueiredo* on Jul 15, 2011, 5:07 pm* The LEED´s definition of... Last reply: Susan Walter, Jul 28, 2011, 2:46 pm	2	Susan Walter LEEDuser Expert HDR Thu Jul 28, 2011, 2:46 pm
Interior concrete stain Schools-2009 IEQc4.2: Low-Emitting Materials—Paints and Coatings posted by Chris Sanders* on Jun 22, 2011, 2:12 pm* Does interior concrete floor stain fall into the Floor Coatings category, with 100 g/L... Last reply: Dwayne Fuhlhage, Jul 28, 2011, 1:15 pm	2	Dwayne Fuhlhage LEEDuser Basic Member Sustainability and Environment Director PROSOCO, Inc. Thu Jul 28, 2011, 1:15 pm
Flag Pole Light & ASHRAE LPD calculations EBOM-2009 SSc8: Light Pollution Reduction posted by Art Kamm* on Jul 28, 2011, 1:03 pm* ASHRAE/IESNA Standard 90.1-2007 does not specify on...	0
Compliance if there are no fixtures on the design CS-2009 WEc3: Water Use Reduction posted by Jose Salinas* on May 26, 2011, 11:31 am* Hi, The Owner is constructing a tower with high end tenants on the his scope. He wants to leave to the tenant the installation of the water fixtures to give them freedon on the design... Last reply: Devon Bertram, Jul 28, 2011, 12:43 am	1	Devon Bertram LEEDuser Basic Member Sustainability Manager YR&G Thu Jul 28, 2011, 12:43 am