I have a new campus project where two of the seven buildings are getting certified. So, we have a Master Site registered and two individual building registrations.

Can laundry drain water be considered as non-potable water source for the credit compliance through Option 2?

Hi Leeders, Option 1a for Infill Site determination stipulates the following: "At least 75% of [the project site] boundary borders parcels that individually are at least 50% previously developed,

Very simple question: What should I write in the "Location Info Source" column of the template: the location of manufacture extraction, the info source or the location of the info source? Thanks!!

We are employing 0.5 gpm lav fixtures with sensors and timed cut off at 10 seconds. Can we factor those to 0.125 gpm because the average use will be say 20 seconds?

Project location: National Park Project Scope: Relocation of historic building Designation: Retains SHPO designation MR Credit 2: CIRs state relocation results in contributing to Material Reuse cr

I am working on a project where there are no core spaces and all of the fixtures will be provided by the tenants.

See Techinical advice from USGBC.

Could anyone let me know if USGBC released any extra information on the process to effectively use the BREEAM calculations for LEED energy credits...? The USGBC documentation and the online applic

I am working on a hotel with two separate buildings. Since the parking will be used for the same hotel, the local zoning requirements were met.