Forum quick links
Roof Terraces and Balconies
NC-2009 SSc5.2:Site Development—Maximize Open Spaceposted by Catalina A on
We are certifying a Hotel Project earning credit SSc2.
IEQ credits
posted by Tristan Roberts on
Gavin, yes, those credits apply to the whole building.
project admin duties
posted by Tristan Roberts on
Matt, sorry for the slow reply on the forum here, but it seems like you have things well in hand. Your unerstanding of the reviews seems correct. Do you have any current questions?
contacting reviewer
posted by Tristan Roberts on
Sangeetha, you can also call GBCI with the number on their website. They are often responsive to phone calls.
Comparing Process Pumping between Baseline and Proposed
NC-2009 EAc1:Optimize Energy Performanceposted by Evelyn Dicks, EI, CxA on
I am working on a lab building near the coast where seawater is pumped into the building for use by researchers.
Modeling PCW Heat Rejection for DES vs. System 5 (DX Cooling)
NC-2009 EAc1:Optimize Energy Performanceposted by Evelyn Dicks, EI, CxA on
I am working on a building that supplies process cooling water (PCW) to lab spaces. The PCW rejects its heat through a heat exchanger to the chilled water system from a district energy plant.
vestibule instead of pressure difference
CS-2009 IEQc5:Indoor Chemical and Pollutant Source Controlposted by Nándor Kovács on
I found in ASHRAE 62.1-2004 standard that using a vestibule to provide airlock between garage and regulary occupied spaces is a compilant way to limit the entry of exhaust gases. Is it possible to
LEED Project Boundary, Existing Irrigation, and Crane Placement
NC-2009 WEc1:Water Efficient Landscapingposted by Brooks Critchfield on
We have a project on an existing campus which requires that two large cranes sit next to the project on an adjacent turf area.
Exhaust Rate of at least 0.5cfm/sq.ft
NC-2009 IEQc5:Indoor Chemical and Pollutant Source Controlposted by Maya Karkour on
Hi All, Assuming that one of the hazardous chemical area also has a fresh air supply (in addition to the exhaust), how do we determine if the min exhaust rate (0.5cfm/sq.ft) is achieved.
LEED for Homes - outside the USA ?
posted by Mike Barker on
The usual question from the international market ? How do we rate houses outside continental USA ? Could we make use of a LEED for Home AP who works in the USA ?