Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

ASHRAE/eQuest question - external blinds and SHGC requirement

CS-2009 EAc1:Optimize Energy Performance
posted by  Agnes Vorbrodt  on 

Hello, In a CS office building we specified SHGC=0.35 (for zone 5 ASHRAE requires

1
Fri Aug 26, 2011, 7:14 pm

Who may purchase RECs?

Schools-2009 EAc6:Green Power
posted by  James Keohane  on 

Is acceptable for a member of the design team or construction team to purchase RECs? May a project team purchase RECs using project contingency funds directed by Owner?

1
Mon Jul 18, 2011, 12:21 pm

ACP

Pilot-Credits PC1: Life-Cycle Assessment (LCA) of Building Assemblies and Materials
posted by  Whit Faulconer  on 

Thanks Batya, and Susan hit the nail on the head. Proposing that at some point an LCA based credit could be an ACP for some of the MR Credits is tricky for many reasons.

0

What about embedded Adhesives

NC-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Maya Karkour  on 

Hello, Assuming the building is purchasing pre-made MDF, or plywood for interior installation.

1
Mon Jul 18, 2011, 4:53 pm

Tenant Electricity Meters

EBOM-2009 EAc3.2:Performance Measurement—System-Level Metering
posted by  Mitch Gascoyne  on 

Does anyone have any experience with tenant sub-metering and compliance with this credit?

1
Thu Feb 16, 2012, 10:33 pm

SHGC of a double skin curtain wall

NC-2009 EAp2:Minimum Energy Performance
posted by  Chaan Ah Bahk  on 

Hi All, I'm working on a project building with double skin facade, and this double skin facade system is equipped with an automatic shading device in the cavity space between the glazings.

1
Mon Sep 19, 2011, 4:23 pm

Can I use daylight or views to satisfy multiple buildings?

EBOM-2009 IEQc2.4:Daylight and Views
posted by  Erin Holdenried  on 

I am working on an EB:O&M 2008 multiple buildings project on a campus that includes 10 buildings within the LEED boundary.

1
Tue Sep 13, 2011, 4:28 pm

energy modeling

CI-2009 EAp2:Minimum Energy Performance
posted by  Christine Teichert  on 

Does CI certification require energy modeling for silver certification?

0

Recommendations for Wireless Automatic Readings

EBOM-2009 WEc1:Water Performance Measurement
posted by  Jenny Carney  on 

Hi All, For those who have meters in hard to reach vaults, I'm wondering if you've found equipment you like for taking remote readings on water meters? Thanks, Jenny

1
Tue Jul 19, 2011, 5:06 pm

Outdoor Air Ventilation Rates to be Modeled

CS-2009 EAp2:Minimum Energy Performance
posted by  Ned Halling  on 

It is not clear to me how to model the "minimum outdoor air ventilation rates".

0