In December of 2010 a LEED project that was certified as Gold was denied the Lighting Controls credit because task lighting was not provided at copy and fax machines.

We have a "zero lot line" LEED project, where the LEED project boundary is essentially the same as the footprint of the building. There is no new parking provided within the LEED boundary.

I am hoping for some guidance on what product category wet/dry vacuums fall into.

If I submit EAc1 in my design review and it gets sent back as likely approved, can I still have the ability to change some things before I submit again for Construction Review?

In EAc1 Related Credits (pg. 260 of BD&C Book) it says that you can mitigate energy use impacts by using renewable energy: refer to EAC2, and EAC6.

I have a project for which we are pursuing Platinum and have an opportunity to use a bio-based material (12"+/-) as a filler under pan deck and concrete.

Please excuse my ignorance on this, but when determining the baseline to compare, I understand that it depends on the substantial completion date of the plumbing system and if before 1993, then use

I am on a block with two other project under construction at the same time. Can I count the other projects in my calculation of development density?

The owner purchase 99% green power in error (70% was to be purchased).

Hi All, We are working for a facility wherein the occupants commute by company buses everyday. Approximately 95% of the occupants use company buspools.