We are concerned that the 3-17 points that go to this credit may be too steep. Are there numbers on how many LEED ND's exist?

I am pretty intrigued by how the first two IP credits have evolved to require setting of performance areas for consideration and then setting up tracking of that performance (in the Implementing Sy

Hi, I'm doing a LEED CS 2009 PRE-certification. My question is: In the "Upload L-4" section, which states: Provide a detailed narrative describing the intended credit approach, including energy ef

I had to look for it, too - In the v3 LEEDOnline scorecard, the fourth column is labeled "RP" at the top and a magnifying glass icon appears next to the regional priority credits based on the zip c

Hi all, Since I couldn't find a LEED CI 2.0 forum, I allow myself to write here (my apologies): The vision of a multi-occupant office goes directly to a terrace which has a high wall located 10

We received a comment back on a CI project stating: "Demonstrate the system serving the special occupancy space is capable of modulating system and zone minimum supply volume below 0.30 cubic feet

This credit is a very good addition. A lot of LEED projects today aren't doing these types of studies and they are very valuable. Consider associating a time frame for this credit.

This credit should be required to be documented in fundamental commissioning Basis of Design document.

Add a process chart to explain the simulations that have to be performed, the time they have to be performed in design, and if they can be used to satisfy IPc1 - Discovery.

The layout of commissioning is based around design-bid-build model and not an integrative design or design-build delivery. This creates either a loophole or exception for achieving the prereq.