Hello,
We typically implement Option D of IPMVP and calibrate the model once one-year of actual energy data is obtained. 

Hi all,

I've been reading some of the previous comments about the humidity controls (both humidification and dehumidification). Am I correct to assume:

Hi,

Hi all.

Question about ASHRAE 90.1 Baseline equipment efficiencies.Project is using System 5 with a Load of around 400kBtu/h.  Table 6.8.1A shows the minimum efficiency to be 9.8

Hello!

The project we are working on has a ground floor tenant space that has the potential to be a restaurant, cafe, small grocer, or even non-food retail (though this last one is relatively unlikely

Hi, Our project is having the parking in the basement floors, makes it all covered. My question is about the parking roof; in our case the roof shall be the "ground floor" and won't be able to co

Hello there,

I have two project sites in question.

1) An very urban site that was previously a parking lot

Has anyone worked with low flow aerators instead of metering since metering is no longer allowed for v4?

We are pursuing the chemical testing path for imported soils. My question is what is the acceptable range or percent difference between the reference and imported soils?