Could you please anybody elaborate what is the difference between the shut-off device control requirement and speace control device requirement mentioned in the Ashrae standard lighting mandatory...

under ASHRAE Table 9--6, there is a space type as bank/office - banking activtiy area. how to justify this?
I have an i-bank office fitout project. can i use that for my lighting in my...

We are doing a fit-out for 1 floor in an existing building in China. The Shell and Core installation provided by the landlord includes the lighting fixtures. So my question is if this existing...

For a LEED CI project that includes a fitness center, do you count the motors in the treadmills and cross trainers? No fitness equipment I have found is Energy Star rated. These loads can be...

I know that for EAc1 there was a requirement that "All LEED for New Construction project registered after June 26, 2007 are required to achieve at least two (2) points." Since I am working on a...

Please let me know if the HVAC Designer will be representing the Design Engineer Signatory for the EA P2? If not who will be the Design Engineer - MEP designer?

Page 3 of the ASHRAE Lighting Compliance Documentation has a table for Interior Lighting Compliance Test for Additional Lighting which reads Total Additional Interior Lighting Power Allownace (...

Ashrae 9.4.1 Lighting control states that "Buildings larger than 5000 square feet must have an automatic control device to shut off all lighting in the building. Is this only the tenant space...

Is it optional to upload all of the compliance forms if you initial the box and qualify for EAc1.3? What if EAc1.3 is not achieved but you have done the model and have some savings shown?...

Hi,

This is the first time I've done LEED CI and EA P2. On the online form, there is a table for inputing your project's Lighting Power Desity to show how much reduction you have achieved...