I have a NCv2009 project that is a dormitory on a college campus.

This is a case where the reference guide and LEED Online do not seem to match. We have a dormitory project that is not...

Is there any protocol for a scenario where there are two buildings joined by an indoor atrium space? One building prohibits smoking, the LEED project, and the adjacent building does not. There...

We have a total ban policy.

I've taken ASHRAE 62.1's 25mm (1") minimum text size as the Norm for No Smoking Signs requirement (even though the requirement is for "smoking allowed" signs)....

I'm trying to find out how many blower door tests are required in a 4-story residential building with appr. 90 units. Do I need to perform a test in EACH unit or just a sample? If sampling, what...

Hello,

I wanted to ask if I perform a Door Blower Test with a HERS Rater will it be acceptable by the USGBC to comply with my...

The project is registered under LEED for Core & Shell version 2.0, the project size is as follows: Total Project Size (Gross sf) 846.113,72 sqft, Commercial Office 402.969,90 sqft, Retail 50....

We have a residential building with common corridors. We are supplying corridor pressurization through the corridor and the intent is to have make-up air supplied to suites through door leakage...

We are certifying two buildings in Boston to be occupied by the State. The state has a No Smoking Policy on all properties. We know that we will have to determine how to convey this policy to the...

There will be no smoking in our buildings (DoD requirement); we will have smoking allowed outside the 25' perimeter outdoors. As such, would it violate the requirements of IEQp2 to have smoking...

If a dedicated smoking area is on the rooftop of a buildng and there is an operable window on the floor below, does the distance between the smoking zone and the window has to be 25 feet? (or...