Marcus Sheffer LEED Fellow 7group / Energy Opportunities LEEDuser Expert 5903 thumbs up September 18, 2012- 11:16 am How you model something that can't be modeled directly in the software you are using is very software specific. You will need to find a published work around, develop one yourself and explain how it works to the reviewer, or use different software that can model the system. Developing your own work around requires that you understand the software calculations at the code level. So contact the software manufacturer or try posting your question in one of the software forums...

The project is such that it consists of two major renovations of two college buildings and the construction of a new link between them. The energy model is just of ONE building. However, the...

Hello,

I'd like to know if anyone can appreciate the levl of results for a french project under ASHRAE ? Having never done the calculation energy of difficle to approach the level...

Hi all, we have a contradiction here between...

In the proposed building that I’m modeling there is a CAV system without cooling system (in the...

Hi Group,

I searched posts and couldn't find anything like this that has already been answered.

I have a proposed 2000+ ton chilled water system in a building, which will be modeled...

Hi,

I'm working in a project that has 4 conditioned office rooms, which are enclosed by walls, and a café (adjacent to the office) that is natural ventilated.
The café is open to...

I have some doubts concerning air loops of the baseline model, system 5 (Packaged...

Hi,

We are modeling an office building in Moscow. There are large underground parking levels that are heated. Now Appendix G says that if any space is heated or cooled in real life, than...

The efficiency of the boiler that I’m modeling has to respect Table 6.8.1F of ASHRAE 90.1:2007. More precisely, the thermal efficiency Et shall be equal to 80% according to the test procedure 10...