Log in
Forum » NC-2009 EAp2
Topic

Zone isolation

NC-2009 EAp2: Minimum Energy Performance
posted by Ricardo Sá on Oct 22, 2013, 10:15 am

In an office building, shall meeting rooms (sporadically occupied within the schedule defined for the remaining occupied office areas) be considered an isolation zone according to ASHRAE 90.1 (...

Last reply: Marcus Sheffer, Oct 22, 2013, 4:09 pm

Feature lights

NC-2009 EAp2: Minimum Energy Performance
posted by Phillip Cook on Oct 22, 2013, 5:04 am

We have some external uplights that are used to light statues from below. I presume these go into the calculation as a special feature area which has a baseline unit of 2.15W/m2 - but how do I...

Last reply: Marcus Sheffer, Oct 22, 2013, 3:55 pm

ASHRAE STANDARDS 90.1 Appendix G- Humidity Controls

NC-2009 EAp2: Minimum Energy Performance
posted by Curtis Clark on Oct 18, 2013, 3:26 pm

Appendix G does not address humidity controls. Is it correct to assume that if you have humidity controls in the proposed building, you must put the same humidity controls in the baseline...

Last reply: Marcus Sheffer, Oct 18, 2013, 4:47 pm

Energy Savings- Solar Water Heating

NC-2009 EAp2: Minimum Energy Performance
posted by Marina Andrade on Oct 17, 2013, 1:51 pm

Hi!

when i have a solar water heating system, must submit like energy savings?

Thanks

Last reply: Marcus Sheffer, Oct 17, 2013, 2:17 pm

Minimum equipment efficiencies ASHRAE 90.1

NC-2009 EAp2: Minimum Energy Performance
posted by Ricardo Sá on Oct 17, 2013, 6:55 am

Can anyone please clarify if packaged air-to-water heat pumps (chilled and/or hot water production) have to:
1) comply with minimum efficiency requirements set to for water chilling...

Last reply: Marcus Sheffer, Oct 17, 2013, 10:45 am

Vestibules for retail shops less 300 m2- NR

NC-2009 EAp2: Minimum Energy Performance
posted by Jean Marais on Oct 17, 2013, 5:12 am

I'd like to use 5.4.3.4 Exception g to exclude the need for vestibules for each shop entrance of the shops that our office building has on the street level. The shop spaces are all less 100 m2 in...

Last reply: Marcus Sheffer, Oct 17, 2013, 10:34 am

On-Site Renewable Energy and the Prerequisite 2

NC-2009 EAp2: Minimum Energy Performance
posted by Jalal Avades on Sep 20, 2013, 8:08 pm

Is it OK to achieve the EA-P2 by including the onsite...

Last reply: Marcus Sheffer, Oct 17, 2013, 10:29 am

EAp2 Option 2 Advanced Energy Design Guide

NC-2009 EAp2: Minimum Energy Performance
posted by Debra Sypien on Oct 16, 2013, 1:43 pm

In order to comply with LEED 2009 EA prerequisite 2 option 2, is it necessary to follow both daylighting recommendations in the Advanced Energy Design Guide climate zone 5 recommendation table,...

Last reply: Marcus Sheffer, Oct 16, 2013, 3:01 pm

Baseline for hospitals

NC-2009 EAp2: Minimum Energy Performance
posted by Lise Dannesboe on Oct 15, 2013, 1:33 am

Hej! As there is a baseline for data centers (tool developed in excel), is there also a similar document or any guideline for hospitals?

Last reply: Lise Dannesboe, Oct 15, 2013, 11:50 am

Data Centers baseline

NC-2009 EAp2: Minimum Energy Performance
posted by Gustav Alfaro on Oct 13, 2013, 9:32 pm

Hi to all:

We are modeling a data center under LEED v2009, but we need to show savings in the process loads (servers, UPS and transformers) since the achieved savings in HVAC and lighting...

Last reply: Marcus Sheffer, Oct 15, 2013, 11:39 am