Hello,

We have a project where our resort rooms will be using spray foam insulation above a concrete slab, set in zone 1. Our rooms are actually small villas. The villas have...

If you have a multi-family building with curtain walls can it still meet the requirements for the energy model? How should the baseline be done?

Hi,
bathrooms can have a manual shutdown device for lighting?
It is mandatory that all toilets automatically switch off the lighting?
Thanks

We are considering LEED certification for a four season golf range hitting facility that will have hitting areas with overhead radiant heaters and indoor conditioned areas as well. I assume we...

Dear all,
Hi.
For LEED NC certification, I’m modeling a building with 03 floors and less than 14.000 m² conditioned floor area. The proposed cooling system is composed by absorption...

My proposed design has multiple AHUs supplied from a dedicated outside air...

How could we find a baseline model for an intensely refrigerated building, such as skate / ski indoor pavilion?
Does ASHRAE provide with some guide-lines or should we "build" our own...

The...

Project background: The project owner has purchased an unconditioned warehouse with the intent to convert it 100% into a school. Approximately 92% of the existing walls will be thermally...

If I model a hydronic HVAC plant shall I consider in the proposed model the heat losses through the pipes? And in the baseline model?
Is modeling the pipes as adiabatic in both models...