We are working on a stadium Project, where the item 9.4.1.1 (Automatic Lighting Shutoff) of ASHRAE 90.1-2007 is being complied for most of the areas, which represents more than 90% of the project...

In the item 9.4.1.2 (Space Control) of ASHRAE 90.1-2007, it is not clear if the lights of the classrooms/conference/meeting/break rooms have to be controlled only by occupancy sensors controls....

9:54 am The best place to post software specific questions is the eQUEST discussion forum found on onebuilding.org There is extensive discussion in the archive on this subject. First question-...

My project consist of a mixed used tower (G+52 floors) and 2 detached building ( be fed from the same cooling and heating system ) but they are core and shell and I m persuing LEED NC 2009...

In the building we are modeling 3 tyes pf glass (3 different U values and SC) are used by the architect.Is it acceptable for EAP2 that I do the following:
1-Use % or glass on each...

If our Baseline building design HVAC system is ASHRAE’s #6 or #8 (according to TABLE G3.1.1B). Do we have to calculate and simulate both, fan power according to section G3.1.2.9 (System Fan Power...

Part of my project is considered as fit out which means that there are some office floors where the area is divided into offices and to each office a chilled water tap point is provided is air...

We have a 4 story college dormatory building, 113,000 SF. Originally we used the building area method, ASHRAE 90.1-2007 table 9-B allowed for dormitories (1.0W/SF), to determine the W/SF for the...

In the building we are modeling there are some technical floor among conditioned floors for example between the 9th and the 11 th floor which are conditioned there is a tehcnical floor which is...

Hello,
We have a situation where we are attempting to model a highrise building of approximately 450,000 square feet.

The predominant use of this building is residential. The...