Hi All,

I am modeling a "Group Project" which as 4(A,B,C & D) Building in LEED boundary, Building-A is "Treatment area" (Nonresidential), Building-B&C is Leaving units(Residential...

Hi to all,

This multyfamily building has 10 floors and 4 residential apartments per floor. For each apartment, there is only air-conditioning units in the living room, but no air-...

Do I understand correctly from 90.1 Table G3.1 item 5f for baseline building that I can input the existing envelope conditions in the baseline model in lieu of the 90.1 minimum envelope...

Hi LEED experts,

My project is a new construction dorm and building developer are requesting apartment owners to buy new efficient air conditioners that meets minimum COP as ASHRAE 90.1 ...

Hi there

Can we use our pumps Balancing/Start Up Report Hp's rather than the Design? Or does LEED/Ashrae require us to model at design conditions (since Balancing/Start Up Report are ...

I am working with shopping mall project. each shop has equipped with FCU units for air conditioning while separate treated fresh air...

Hello,

I have a project which is looking into Battery storage as a means to save $ by discharging the batteries during the...

Hello,

I want to know which the energy savings are comparing a Heat Recovery Air Cooled Chiller in the Proposed Building versus it´s equivalent in the Baseline Building.

The...

Hello,

I am modeling a winery and some of the chillers participate only to chilled and heat wine tanks.

We are documenting everything to get the credit for usind these very...

I believe, In any case the proposed building can not be 100% as per design. There will be always variation regarding HVAC equipment selection (e.g. head change wrt actual site installation...