Question: If I have an air cooled chiller selected at non-ARI conditions that has a full load efficiency of 3.0 COP, does it comply with the minimum efficiency requirement of 2.8 COP from ASHRAE...

Folks,

Is there any exception for the 2% and 3% voltage drop? We are working on a subway station and we were able to achieve 3,5% to the feeders and 3% to the to the branch circuits....

When modeling the Baseline Bldg, where is the best place to add the 15% safety factor for cooling that is allowed by G3.1.2.2? In Carrier's HAP, it can be added at the “Sizing Data” tab or at...

Hi,

I have a doubt on how to establish the heating setpoint for an HVAC system which has no heating system.
In a specific project, I have only cooling system serving conditioned...

We would like to find out what have been included in item "Other Clg Accessories" under Primary Cooling in Energy Consumption Summary.

In our baseline, Package Terminal...

Our case involves 16,000 sqft of cooled and heated space and 90,000 sqft of heated-only space. The two spaces happen to be separated by a 4-hour fire wall. Our inclination is for the baseline to...

We have a University Science Building that will house research and teaching labs with multiple...

Hello

I'm working on a project that has conditioned areas on 6 floors, but in two of those floors has only 5% of all conditioned area , can I consider these floors conditioned as the...

I have modeled parking garage in the simulation by taking 0.75 cfm/sf (exhaust)from ASHRAE 62.1-2007 which leads to energy consumpation of 43,450kWh. And in proposed case we are using CO sensor...

How should a future process be taken into account? If a project has a space allocated for additional equipment (high heat gains, energy intensive) but it is unknown at what stage (during building...