I have a Client that is considering LEED certification, we have done a preliminary energy model, we show a 24% savings off the baseline.

Dana, could you please post this to our EAc6 forum? While you're there, I think you may find the answer from previous posts.

Our porject is a manufacturing facility that produces generators and converters for wind turbines. A component of the manufacturing process is the balancing of the generator rotors.

what the value of runoff coefficient for gravel area (2% gradient)?

Are HCFCs considered to be CFC based?

Curious if anyone has submitted a "mixed submittal" before either during the regular LEED submissions or during an appeal? The project we're working on - some of the spaces comply with calculation

Hi Rachael, I'm not absolutely sure about the FTE calcs in terms of bike racks, but if I had to guess, I would say that the number of bike racks and showers could be based on employee counts. For

The requirements of 5.4.3.4 (ASHRAE 90.1-2007) are very strict. My team is trying to certify a shopping mall with many shops opening directly to the outside.

Adhesives and sealants must meet the VOC limits defined by the SCAQMD Rule 1168 respectively the Green Seal Standard for Commercial Adhesives GS 36.

The MPR's state that "The LEED project boundary may not include land that is owned by a party other than that which owns the LEED project unless that land is associated with and supports normal bui