I see that there are rulings about not including roof area which is covered in PV or mechanical equipment. Q: does this go as far as determining that the space between panels ( allowing for reason

For a building located in a tropical climate with an open- air lobby around the elevator banks, would indoor/outdoor carpeting completely under the cover of the building meet the requirements?

We're working on a Residential Project, after the design submission the certification body told us that It was not clear if the Baseline case fan power was modeled correctly.

The LEED Reference Guide, in the example calculation for development density, indicates the project building and site must have a 60k sq ft density per acre or more.

Probably not - see the discussion at http://www.leeduser.com/credit/CS-2009/SSc5.1

We have a stadium project that will be retrofitted (major renovation) and will be certified under the LEED NC rating system.

We are working on a project with 42" high window sills. Does this eliminiate any chance of achieving this credit? Must the sills be at 30"?

Can you tell me how to calculate for multiple draingage sites, i have Three on this particular project. The TC is based on the length and travel and the slope towards the discharge point .

I have a major building entrance in my LEED boundary as well as some exterior entrances to a courtyard- do I need the mats to the courtyard area too? Then we have restrooms but no janitor closet or

We are proposing to install equipment for measuring the consumption of irrigation water, toilets and cooling towers.