Post a question or comment
Filter by location
Forum
Topic
Replies
Recent
Default Avatar

Eco-Friendly worksafe solvents

Green Globes Discussion Forum
posted by  Robert Marsh  on 

Removing dust, dirt, allergens, and infection-causing agents like viruses is a key component of a healthy indoor environment and doing it in a Eco-friendly way is best of all the techniques.

0
Default Avatar

MEPC's New Construction U-value cannot be changed?

NC-v4 EAp2:Minimum energy performance
posted by  JAMES CHEN  on 

Recently, we will build a two-floors building made of metal material,  but ROOF and WALL of MEPC's New Construction Nonresidential will automatically run U-0.273 and U-0.479, respectively.

1
Tue Jun 5, 2018, 3:09 pm
Default Avatar

Using a different Energy Consumption in EAc2 to EAc5 to reflect actual conditions

NC-v4 EAc5:Renewable energy production
posted by  Tim Middleton  on 

We are working on a Manufacturing Project in Vietnam with very high non-regulated loads (around 75% of the total energy consumption).

2
Profile picture for user sheffer
Marcus Sheffer
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Tue Jun 5, 2018, 7:06 am
Default Avatar

Chilled water from on-site electric chiller plant

CS-v4 EAc3:Advanced energy metering
posted by  Nuttanee Vongveeranonchai  on 

Hi all,

3
Mon Jun 4, 2018, 8:12 pm

waste rooms

NC-v4 EQp1:Minimum indoor air quality performance
posted by  Francesco Passerini  on 

The project is located in Europe and standard EN 15251 is considered for the achievement of this prerequisite.

1
Thu Jun 7, 2018, 1:05 pm
Default Avatar

mineral based surface hardener

NC-v4 EQc2:Low emitting materials
posted by  Agnieszka Rylska  on 

Hello,

1
Wed Jun 13, 2018, 10:47 am
Default Avatar

impregnating agent based on silicate

NC-v4 EQc2:Low emitting materials
posted by  Agnieszka Rylska  on 

Hello,

1
Mon Jun 4, 2018, 2:05 pm

Non-Default Duration

CI-v4 WEc1:Indoor water use reduction
posted by  Chen Shalita  on 

Hi,

I am wondering if anyone has encountered a situation where are non-default flow duration (for example in a restroom faucet) would be applicable?

Thanks

1
Tue Jun 5, 2018, 4:29 pm
Default Avatar

Design Changes

NC-2009 EAp2:Minimum Energy Performance
posted by  PAWAN DAHIWAL  on 

I believe, In any case the proposed building can not be 100% as per design. There will be always variation regarding HVAC equipment selection (e.g.

1
Mon Jun 4, 2018, 3:54 pm

PC Registration for Multiple Projects

Pilot-Credits IPpc90:Social equity within the operations and maintenance staff
posted by  Brightworks Sustainability  on 

Hello,

1
Mon Apr 15, 2019, 3:45 pm