Forum quick links
Lactation Room WEp1 Sink Calcs
NC-2009 WEp1:Water Use Reduction—20% Reductionposted by Rob Hink on
We have a NC project that has a lactation room with a sink in the room of a cruise terminal. There will be 345 FTEs and 7,000+ Visitors on a daily basis.
Architecture firms with resilient design capability (baked in)?
posted by Barbra Batshalom on
Hello Gurus,
I have a client (bldg owner) who has asked me to recommend a list of firms who have the internalized resilient design in their practice.
Stamped Cutsheets: to be or not to be?
posted by nancy picard on
Must the cutsheets provided for some credits (ex: water reduction) be stamped by the engineer?
ASHRAE 90.1-2010 Baseline Fan Power Calculator
CS-v4 EAc2:Optimize energy performanceposted by Ciaran McCabe on
Hi,
As anyone got a Baseline Fan Power Calculator for ASHRAE 90.1 2010 like what was available for 90.1 - 2007 created by the 7 group ?
90.1 2010: V4: Baseline Lighting Control
NC-v4 EAp2:Minimum energy performanceposted by Adrien Dumolard on
Hello, I work on my first PRM. In the 9.4.1.2 mandatory provisions, the standart say: "The controlled lighting shall have at least one control step between 30% and 70% (inclusive) of full lighting
WEc1 Thresholds Tab
NC-2009 WEc1:Water Efficient Landscapingposted by H M on
Within the WEc1 "Thresholds" tab, there is a green button that reads "Submit". Are you supposed to click this button in order for the credit to be ready for review?
IEQ Space Matrix?
NC-v4 EQp1:Minimum indoor air quality performanceposted by Erica Downs on
Is the IEQ Space Matrix still relevant for this Prereq under v4?
VOC Budgets and Select One Option Guidance
NC-v4 EQc2:Low emitting materialsposted by Michelle Rosenberger on
We have a v4 project that would like to use a small amount of a coating product that does not meet VOC content requirements.
Aging Industrial Building - How to approach rating system selection?
posted by Amy Hood on
Any guidance out there on a recommended approach for selecting the LEED appropriate rating system on an aging Industrial/Manufacturing facility that is undergoing minor renovations?