I am part of a team working on a multiple building complex LEED project at an Army Infantry installation.

Hi all, I am in the middle of working on the SSc7.2 roof for and a bit confused. We are using a High albedo material covering 100% of the roof.

I have a project that has 30 stories of above-grade office/retail/parking structure and 3 levels of below-grade parking.

Hello, I have a few questions regarding how to demonstrate the amount of refrigerant charge. The questions are as below. 1. Situation We are preparing design phase review.

Hello I am working on a project in the UK and we are struggling to get the 1 year 24 hours rainfall.

Hello When following the ACP, the LEED manual states that attenuation must be undertaken through Low Impact Development (LID) and green infrastructure strategies.

As far as we read the Mandatory Requirements of ASHRAE 90.1 required by EAp2, performance requirements must meet the specifications of Table 7.8.

As discussed briefly above: even though the credit language states bicycle racks are to be calculated for only student and staff, LEED online form includes transient numbers in its calculations.

Do I need to include the areas on the site which are covered with decomposed granite in my hardscape calculation?

Hello, I'm working in the simulation of a building which has many HVAC zones defined so that should be modeled each ones as a separated thermical block but the zones of proposed building complies t