Post a question or comment
Filter by location
Forum
Topic
Replies
Recent
Default Avatar

Cal Green Code Maximum Flow Rate for Non-Residential Fittings

NC-2009 WEp1:Water use reduction
posted by  Jeremy Cressman  on 

Just when you thought you figured out the new commercial LEED faucet baseline (.5gpm or .25gallons per cycle) ... The State of California adopts the CalGreen Building Code effective January 2011 r

0
Default Avatar

Really? I'm a sales rep??? How does that work?

General forums
posted by  Eric Johnson  on 

"19.

1
Thu Feb 10, 2011, 3:22 am

Owner maintained carpet entry systems

NC-2009 IEQc5:Indoor chemical and pollutant source control
posted by  Susan Walter  on 

I have an in patient Hospital project and we are providing roof gardens and access to those gardens. Hooray for direct access to nature! My question in on the entryway systems.

1
Fri Mar 4, 2011, 2:55 pm

Tenant Sub-metering Question

CS-2009 EAc5.2:Measurement and verification - tenant submetering
posted by  Lorey Flick  on 

What is a typical "centrally monitored" system? I have a core and shell space that will be providing sub-metering for it's tenant and a monthly bill indicating usage, peak, and cost.

1
Fri Feb 25, 2011, 12:40 am
Default Avatar

Clarification on minimum energy savings and EA credit 1

NC-2009 EAp2:Minimum energy performance
posted by  Joanne Haye  on 

I have a Client that is considering LEED certification, we have done a preliminary energy model, we show a 24% savings off the baseline.

1
Fri Feb 11, 2011, 9:46 pm

EAc6 forum

General forums
posted by  Tristan Roberts  on 

Dana, could you please post this to our EAc6 forum? While you're there, I think you may find the answer from previous posts.

1
Thu Feb 10, 2011, 8:56 pm

Activity Generated Electricity from a Manufacturing process

NC-2009 EAc2:On-site renewable energy
posted by  Kendal Neitzke  on 

Our porject is a manufacturing facility that produces generators and converters for wind turbines. A component of the manufacturing process is the balancing of the generator rotors.

1
Fri Feb 11, 2011, 7:22 pm
Default Avatar

runoff coefficient

NC-2009 SSc6.1:Stormwater design - quantity control
posted by  Eric Yao  on 

what the value of runoff coefficient for gravel area (2% gradient)?

1
Wed Feb 16, 2011, 8:22 pm
Default Avatar

CFCs vs HCFCs

EBOM-2009 EAp3:Fundamental refrigerant management
posted by  Zachary Goodnough  on 

Are HCFCs considered to be CFC based?

0
Default Avatar

"mixed submittal" for EQ pre 3 ?

Schools-2009 IEQp3:Minimum acoustical performance
posted by  Candice Groves  on 

Curious if anyone has submitted a "mixed submittal" before either during the regular LEED submissions or during an appeal? The project we're working on - some of the spaces comply with calculation

1
Fri Feb 18, 2011, 4:27 pm