Hi All, I am trying to establish if a project can take benefit in the energy model for an improved air infiltration rate for the building envelope over the baseline model.

I have a doubt, we have a project of a complex of 3 buildings that is located inside a University Campus.

The planned C+S development is a shopping center that will include retail, restaurants, a grocery store and movie theater.

I have a mill-work submittal that requests : LEED Submittals: 1. Product Data showing VOC content does not exceed 30 g/L for wood adhesives and 80 g/L for contact adhesives. 2.

If solar panels on our building‘s roof are serving another building‘s energy needs, can we still exclude these solar panels from calculations as mechanical equipment?

Should decorative lighting be included to Options B&C ? This decorative lighting is not within 15ft of windows and is independently controlled by occupancy sensors.

One of the elements of this credit includes: The development of a manual, guideline or case study to inform the design of other buildings based on the successes of this project.

Is the Performance Summary Report generated by Trane Trace 700 (Ver 3.0) be enough for the LEED V4 EA credit?

I am working on a hotel project that has historical occupancy rates of 80%, which is higher than the LEED default rate of 60%.

Hi All, We would like to get your opinion in the situation below if approach is acceptable to IEQp1: We have an enclosed Driver’s lounge, Lift lobbies and Administration office at the Basement fl