Please give me a feedback if I have calculated right the Fan Power of the baseline building. Note that my baseline building requires an air heat recovery system (based on ASHRAE 90.1-2010) and...

Dear Leed users,

Baseline building based on ASHRAE 90.1-2010:

1. In my case based on paragraph G3.1.2.11 and in accordance with Section 6.5.6.1 due to the climate zone and the %...

We are dealing with a manufacturing facility that has energy intensive process loads.   Is there a standard way to establish a base case for manufacturing process loads?   

How does one...

I understand fire station has residential spaces.  Under 90.1, it requires residential to use PTAC #1 for system type.  Due to having gas available, is it correct to model the baseline system...

Hi Sir,

Greetings!

The following content is copied from,

Page No,38 of...

Marcus Sheffer LEED Fellow 7group / Energy Opportunities LEEDuser Expert 5903 thumbs up November 1, 2019- 10:05 am This is far to much to respond to in a single post. I would suggest that you break up your issues/questions into separate posts and place them in the appropriate forums. Log in or register to post comments Josh Beauchemin LEEDuser Basic Member November 4, 2019- 11:09 am Thanks Marcus, I'll try that! Log in or register to post comments ...

Dear Leedusers,

I was wondering: At pltaform LEED online is it asked to upload the original output file from the energy simulation software in native format?

Or is it just necessary...

Hello to all LEED user experts,

In our project the...

Okay, have a dormitory building renovation project that includes the following:

• Is registered on the National Register of Historic Places (1880-era), so is technically exempt from...