Dear Leed Users,

For the location of the project I have found a lot of years of climate data? At the beginning I had only the year 1979, but now I found the years from 2009 -2019. Which...

Hi all,

We have an unoccupied building (sub station) that has corridors, toilet etc for very occasional maintenance occupancy. 

The makeup air unit/DOAS system provides enough OA to...

Dear all, 
I need your professional opinion about a project that I am currently working on.
The HVAC zones and zone groups tree is like: Group 1>A(5)>A.1(Master), A.2, A.3, A.4...

Hi, we are consisering options for our high process load building in meeting the minimum requirements of the energy credit. 

We have spaces that have a high heat load, and non-mechanical...

when working With Roof Tops machines and commercial split system or water chiller with air handling units I consider the economizer is required as per ASHRAE section 6.5.1, is this correct? ...

Hello All,

I have an architect telling me that a project in Miami, FL used COMcheck to show compliance with EA Credit Optimize Energy Performance. Is this possible? I would assume no,...

Dear All:-

it our industrial project we have energy cost saving of 37.8%  can we take it as 38% to get more points because i need 15 points in energy to get correct ratings 

Hi,

I am working on a laboratory project and we are using ASHRAE 90.1 2013 for the energy credit.  In 2013 it states the baseline lab exhaust shall be modeled as constant horsepower...

Hi - Our solar PV system is adding two points to our "optimize energy performance" category due to the cost offset. Can I also claim additional points for...

We're modelling an office building (space by space method) with a relatively big server room (50kW). We couldn't find a room type that corresponds to a server room and are wondering whether it'll...