Hi everyone,

We are currently working on a Core & Shell project and in terms of HVAC equipment it will comprise VRF units with indoor FCUs. However, the MEP scope of design at this...

Hi all,

Situation:

Working on an all electric urban community college classroom building. The domestic water heating is provided by a series of heat pump water heaters. The domestic...

Has anybody used the EPA LEED...

Hi all,

We are currently working on a project which is a building with two levels - Ground floor level and Level 01. Level 01 is 1,000 m2 and consists of hotel rooms, whereas Ground floor...

Hi

I have a site that does not have enough power from the local grid so is considering a self contained LPG based generation on site. I'm just wondering if this will have an impact on any...

Greetings!..

We have begun the energy modeling for factory building. In addition to the factory, the building houses a warehouse and an administration office. The building has 2,00,000...

I am currently working on an energy model for a Firing Range building which will pursue V4 BD+C New Construction. The firing range space requires 75 feet per minute air flow (as per NIOSH).  The...

Hi All,

We are conducting feasibility study on an existing building in which we are changing chillers. And we are planning to comply under Option 3: Historical Data

The building is...

Dear Concern:-

I have purchased renewable electrical energy from the nearest solar power plant as Kwh so I have to get a point in Renewable energy via Tier 2 because the solar...

We have a project that there are two steam plants, one for dehumidifier and processed steam. We have rack washers that use Steam and electricity to do the job. These rack washers are fed by Steam...