Hello All - It is so wonderful to virtually meet everyone and read through introductions.

On our project, there is no deck, just purlins, insulation and metal roof panels. We'll be reusing the roof and the purlins and likely replacing the insulation.

To be clear, does the upstream equipment in a District Energy System need to be considered for the prerequisite or only for the enhanced refrigerant management credit?  Based on the "project t

Our LEED project is a Commercial Interior that is in a new building that is still under construction.

The link below, fromLEEDuser, indicates that if you can use actual utility bills x 50% x 2 yrs to calculate the required quantity of RECs as opposed to the EAc1 energy model design consumption x 35

Hi All, Kindly clarify baseline LPD to be used for multi-family residential spaces (living room, bed room, kitchen, rest room, etc) as per ASHRAE 90.1-2010.

We have a question regarding density radius.

Hi.

I am working on a LEED v.4 C&S office project, but since a PI forum section for it has not been set up on LEEDuser yet, I thought I'd post here.

Hi all,

I have asked a few of you in this list, but thought I might expand the question to the wide group.

An existing office building, LEED EBOM GOLD certified in 2014, is going to be renovated now.