My client is a pharmaceutical facility that occupies part of the area of an existing building.

Dear Fellow LEED Users, In the Irrigation Design Case tabulation, can I declare "reject water" from reverse osmosis equipment system of campus, as the source of non-potable water? Thanks in advan

We are working an a project about a building using purchased hot water and purchased chilled water from DES.

I am wondering if you can obtain the credit for Construction IAQ management plan DURING CONSTRUCTION along with BEFORE OCCUPANCY or if it is just one credit or the other.

We are pursuing v2009 certification on an office building for this credit using Pilot Credit 30 for bicycle routes (alternative compliance path); however, since this project started the pilot credi

Good Afternoon, Our manufacturing plant was constructed in 2014-2015 and went online in August of 2015.

This says we have to reduce from the baseline, which I assume is our initial reported use. However, if this is the case how can there be any reduction?

Dear All we have model the factory project with 50% A/c and 50% Ventilation and the fresh air is supplied by ERV, HRW, Treated fresh air units to A/c areas but the ERV, HRW, Treated fresh air unit

I am working on a project, which is going for LEED C&S. The project has tenant occupied space, which has designed HVAC system for it.

Dear All we are using (http://smap.cbe.berkeley.edu/comforttool) this link for thermal comfort results but we use PMV method for A/c areas and Adaptive method for ventilated areas (due to lack of