Forum quick links
Pilot Credit: Procurement of Low Carbon Materials
CS-v4 INc1:Innovationposted by Michelle Bombeck on
Hi all - Just sharing our experience so far with this pilot credit, as required... We're pursuing this credit on a large speculative CS office project in WA.
LEED v4.1 Service water-heating system with DES purchased heat
NC-v4.1 EAp2:Minimum Energy Performanceposted by Manuel Romera Molina on
Hello everybody,
Baseline Exhaust Energy Heat Recovery
CI-v4 EAc2:Optimize energy performanceposted by Ciaran McCabe on
In ASHRAE 90.1 Table 6.5.6.1 - Exhaust Energy Recovery Requirement where they mention % Outdoor Air at Full Design Airflow Rate are they referring to the "minimum outdoor air" value ?
Aerosol Paints/Coatings - Emissions/VOC Compliance
NC-v4 EQc2:Low emitting materialsposted by Brad Newkirk on
Based on the language in SCAQMD 1113 (June 3, 2011) and CARB 2007 SCM for Architectural Coatings, aerosol paints/coatings (i.e.
Armstrong Ultima, Optima and Prelude XL
NC-v4.1 MRc4:Material Ingredientsposted by Cam Burkacki on
Hi all,
Looking for some help finding Material Ingredients Option 2 documentation for the following products:
Does anyone have a good example or template for a Green Cleaning Policy that meets LEED Version 4.1 requirements
EBOM-v4.1 EQp3:Green Cleaning Policyposted by Frank Weiss on
Does anyone have a good example or template for a Green Cleaning Policy that meets LEED Version 4.1 requirements.
Design Flow Rate higher than Baseline
NC-v4.1 WEp2:Indoor Water Use Reductionposted by Talia Mamayek on
Hi,
Worksheet as helpful tool
Pilot-Credits IPpc93:Prevention through Designposted by Greg Romanczyk on
We found the PtD worksheet to be a helpful tool during Design and Construction process reviews.
Opt 2. Waste Prevention
NC-v4.1 MRc5:Construction and Demolition Waste Managementposted by Dave Hubka on
If a project pursues Option 2 - Waste Prevention is it required to track disposal and diversion rates of the project?