What are possible conditions to enable excluding underground parking from calculations of IEQ 4 - Low emmiting materials? if we have 3 underground levels of parking and they have the following con

Our project has a district heating and cooling system. The inside of the pipes that connect the building with the district heating and cooling system have a paint.

Our project building will we connected to a large-scale city district heating network.

Would copiers (Xerox ColorQube 9303, specifically) that don't use toner but solid ink technology need to be kept in exhausted rooms, per IEQc5? This question assumes they are high-volume copiers.

We have a greenroof that is partially within the LEED Boundary.

We are looking over LEED data for flat veneered wood ceiling panels, and we're unsure if it needs to meet both 4.4 and 4.6, or if meeing IEQc4.4 is enough to ensure that it's compliant with 4.6.

Hi all, We are modeling a new construction hospital whose cooling loads are met by 3 onsite 1350 ton chillers.

We have a lot of small to medium patches of grass that have multiple trees planted in them.

We are working on a CS muti-unit residential project. Does the lease agreement has to be done for future residents to comply with lighting power density indicated on ASHRAE 90.1-2007?

Hello, Our project is an adaptive reuse on an urban site that was previously about 95% impervious.