Dear all, I'm modeling an all electric university building that is 32,000 sf/5 floors with chilled water from a central plant and hot water from an onsite electric boiler.

I am working on a project that is the habitat for a state listed species, and the project team has an elaborate mitigation plan to protect the species and nesting areas - post development there wi

Hi, we are working on a extensive renovation of a 80,000 SF university classroom/office building using LEED NC 2009.

When calculating for a low-flow fixture, it is required to enter a duration (which is default set to 30 seconds).

I know the 'Birds Eye' says that decorative fixtures are not required to be connected to the daylight controls, but I recently received a review comment stating that they must to meet this credit r

Hi, ASHRAE 90.1, section 9 does not apply to lighting within dwelling unit as stated in 9.1.1 footnotes. Table 9.5.1 include LPD allowance for multifamily building.

We have a project that is required by convenants to put irrigation on the front and side of the building that faces the street, but not the rest.

Our project is a small building located inside a factory site plan.

We currently have a school project under construction. Under option 2, we are required to have 2 or more bus lines within 1/4 mile.

For IEQc8.1 Daylight – Light: I'm using the prescriptive approach to calculate daylighting for a 4 story office building that is rectangular in plan with floor to ceiling glazing on every facade.