Hi LEEDuser community, I have read some old posts regarding this issue, but I still want to double check with you guys. I hope you don´t mind.

Hello all, according to the document “Treatment of District or Campus Thermal Energy in LEED V2 and LEED 2009 – Design & Construction”, for Option1: Virtual District Hot Water Rate [$/MBTU] =

Our project is located in Ithaca, NY and curbside recycling pickup has moved into a single stream recycling collection.

Hi All, I am modeling a 350,000 sqft dormitory/dining hall located in NY. Part of the roof of this building green roof (approximately 10%).

My project consists of the following types of spaces: 1. Office: 2,300 SF 2. Manufacturing / laboratory: 24,055 SF 3. Warehouse: 26,905 SF 4.

We are required to designate 12 carpool spaces for our LEED project and plan to install pole mounted signs.

Section G3.1.2.9 says that baseline "system fan electrical power for supply, return, exhaust, and relief (excluding power to fan-powered VAV boxes) shall be calculated" using the formulas given.

Our team submitted a project demonstrating that the building had its performance period for a specific credit done during one (1) year, although the changes and alterations had been made during two

Hi! The building i need to simulate is naturally ventilated and is located in Italy (climatic zone 4A). Which outdoor air rates must be set in the Baseline and Prosposed Case as natural ventilation

Hi, we are working on a theater (capacity: 500 people) and we don't know if we should include lighting and HVAC controls for the audience.