Forum quick links
zip code
NC-2009 PIf2:Project Summary Detailsposted by charles bell on
I can't change the zip code on PI f2. Is this linked to some other form?
ECS - Other clg Accessories under Primary Cooling
NC-2009 EAp2:Minimum Energy Performanceposted by Ivy Chen on
We would like to find out what have been included in item "Other Clg Accessories" under Primary Cooling in Energy Consumption Summary. In our baseline, Package Terminal Heat Pump is adopted.
9.4.1.1 mandatories for CS
CS-2009 EAp2:Minimum Energy Performanceposted by Katherine Ann Resurreccion on
Hi everyone! If the project base building scope does not include the lighting fixtures for tenant spaces but wiring stub-outs are, do we still need to have the automatic control device for the "bu
Water Use Threshold for Credit Eligibility
Pilot-Credits WEpc18:Appliance and process water use reductionposted by Adam Shelly on
There should be some sort of water use threshold that the project needs to exceed in order to be eligible for the credit.
FSC Mixed vs FSC Recycle on Invoices?
NC-2009 MRc7:Certified Woodposted by John Casciato on
If my invoice says FSC Mixed for an MDF order, even tough MDF is a recycle product by design, would that go towards MRc4 instead of MRc7 even if the invoice says FSC Mixed?
Does 62MZ calculations needed?
EBOM-2009 IEQp1:Minimum IAQ Performanceposted by Dorilee Torres on
I am working with a facility to determine if they can meet the prerequisite for the LEED EBOM. Currently the facility has 12 AHU's, some of them working for the same single space.
FSC assembly requirement for LEED
NC-2009 MRc7:Certified Woodposted by Paul Setzer on
Per LEED requirements, woodworkers now have to be FSC certified in order to qualify for the MRc7 point contribution.
summary for mechanically ventilated spaces
CS-2009 IEQc1:Outdoor Air Delivery Monitoringposted by BH . on
So briefly (for C&S mechanically ventilated spaces): For densly occupied spaces we need: CO2 monitors and i.e.
Process energy
NC-2009 EAc1:Optimize Energy Performanceposted by Jatuwat Varodompun on
I got the reviewed comment on the process energy. The way I have modelled is try to add the process load to reach 25% minumum energy threshold eventhough such load does not exist.
Cooling Fuels
CI-2009 EAc3:Measurement and Verificationposted by Nandana Kumar on
Hi, We need a clarification about the cooling fuels. What are cooling fuels referred to? Thank you Nandana