Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Signatories

NC-2009 IEQc7.2:Thermal Comfort—Verification
posted by  William Weaver  on 

I've noticed a subtle change with the most current templates. Particularly, the signatory for this credit no longer specifies who must sign the template.

2
LEED AP BD+C, O+M, Green Globes Professional
JLL
LEEDuser Basic Member
112 thumbs up
Tue Aug 20, 2013, 9:45 pm

C&S for a mixed use building

CS-2009 EAp2:Minimum Energy Performance
posted by  Santiago Rodriguez  on 

Dear forum, We have a project that is seeking the C&S LEED Certification.

3
Tue Aug 20, 2013, 9:20 pm

Fancoils in the same Area

NC-2009 IEQp1:Minimum IAQ Performance
posted by  Marina Andrade  on 

Hi! When two or more fancoils meet the same area, can be considered as a single zone, correct? Thanks!

2
Tue Aug 20, 2013, 4:14 pm

Small Laundry Rooms and Exhaust

NC-2009 IEQc5:Indoor Chemical and Pollutant Source Control
posted by  Adam West  on 

Has anyone not exhausted a small laundry room in a commercial building and had this strategy approved through a review?

6
Mechanical Engineer
Integral Group
LEEDuser Expert
342 thumbs up
Tue Aug 20, 2013, 3:43 pm

21 points

CS-2009 EAp2:Minimum Energy Performance
posted by  Markievicz E  on 

Hi Guys I have a pleasant dilemma. The project is new build offices in climate zone 5a.

4
Default Avatar
Principal : Energy / Electrical Engineer
BuildingPhysics South Africa
LEEDuser Basic Member
94 thumbs up
Tue Aug 20, 2013, 2:22 pm

Applies to equipment as well as building lighting?

Healthcare-v2009 MRc4.1:PBT source reduction - mercury in lamps
posted by  Chris Flint Chatto  on 

We have a question whether this credit applies to lighting integrated with medical equipment, or if the credit only applies to permanently attached building fixtures, like the low-VOC and other MR

2
Tue Aug 20, 2013, 2:13 pm

Where can I find the VOC limits for sealants used as fillers?

EBOM-2009 SSc2:Building Exterior and Hardscape Management Plan
posted by  yan lian  on 

Our review comments has one item, "Provide a revised plan that includes sustainability criteria for sealants used as fillers based on the requirements of BayArea Air Quality Management District Reg

6
Default Avatar
Director of Sustainability
DCS Design
LEEDuser Basic Member
6 thumbs up
Tue Aug 20, 2013, 12:38 am

Older existing building - no VLT available

CI-2009 IEQc8.1:Daylight and Views—Daylight
posted by  Mike Stopka  on 

Has anyone else experienced this? We are doing a Commercial Interiors project in a building that was constructed in the 1950s.

3
Mon Aug 19, 2013, 7:54 pm

Dual toilet flush rate average

NC-2009 WEc3:Water Use Reduction
posted by  Mike D  on 

If we were to calculate the average flush rate of a dual flush toilet (with urinals present in the space) we use the example average flow rate equation provided by USGBC in their Appendix A water c

2
Default Avatar
Sustainability Architect
LEEDuser Basic Member
88 thumbs up
Mon Aug 19, 2013, 3:50 pm

Option 1, Equipment Efficiency - Reuse of Existing Equipment

CI-2009 EAc1.3:Optimize Energy Performance—HVAC
posted by  Tony Ricketts  on 

Hi all, I have a tenant fit-out project served by water source HPs.

3
Default Avatar
Mechanical Engineer
CJL Engineering
LEEDuser Basic Member
22 thumbs up
Fri Aug 16, 2013, 5:39 pm