Hi, I am working on the LEED aspects of a healthcare project in KSA. A full and detailed EIA Study for the project was completed to local standards and no contaimination was found.

Hi there, in our efforts to achieve LEED EBOM certification for a production facility (garment washing plant) in Dhaka, we have implemented energy conservation measures.

Hello all, two little questions about fan's power: - Which is exactly the difference between demand fan power, peak fan power and fan power allowance? - How do i have to relate baseline and propose

I would like to know, where I can find a good source for the specific landscape factors (species-, density- and microclimate factor) of plants for the calculations in the baseline case. Is it even

We have a proposed LEED Silver office building under LEED 2009 for Commercial Interiors.

It is obvious that the LEED reviewers use a set of predetermined comments for certain material claims made.

Our building energy model s.f.(table eap2-1) 74,000+/- does not match the gross building s.f. reported in 1.1A 94,000+/-. The difference is approximately 20,000 s.f.

Hi, 90.1-2007 confuses me a little. Our project (4 story, 9000 m²/90000 ft²) is located in climate zone 1b. The proposed building is heated by an electrical heatpump.

Hi, I know that Appendix G states that if the envelope of a building is renovated, then the existing envelope construction is used for the baseline.

Hi All, we are wondering if the general contractor should implement the ESC at the same time of the leveling and excavation works begin, or if it could done after?