Post a question or comment
Credit Filters
Daylight and Views—Daylight
Filter by location
Forum
Topic
Replies
Recent

Air National Guard Traning facility

NC-2009 IEQc8.1:Daylight and Views—Daylight
posted by  Tyler Barter  on 

Has anyone worked on an Air national Guard traning facility and been able to determine which areas are considered regularly occupied?

1
Thu Aug 18, 2011, 12:27 pm

Floor area calculating

NC-2009 IEQc8.1:Daylight and Views—Daylight
posted by  Mohamed Ravuthar, LEED AP, BD+C  on 

I'm using the Option 2 - Prescriptive Approach for this credit, In particular room has 6 windows and each side two and one side no windows.

1
Mon Sep 26, 2011, 2:14 pm

how to execute calculation if balcony exist?

NC-2009 IEQc8.1:Daylight and Views—Daylight
posted by  Shenhao Li  on 

Hi, Guys I have a residential project, each housing unit has a balcony in front of side window of the living room, should i need to consider shading impact of balcony when using OPTION 2.

1
Mon Mar 10, 2014, 12:32 pm

Conference Rooms with folding partitions

NC-2009 IEQc8.1:Daylight and Views—Daylight
posted by  Christine Spendiff  on 

I have a large conference room with a folding partition to create two smaller conference rooms. Do I run the simulation with the partition open (one large room) or closed (two small rooms)?

1
Tue Sep 9, 2014, 5:09 pm
1
Wed Dec 1, 2010, 5:23 pm

Glass Doors

NC-2009 IEQc8.1:Daylight and Views—Daylight
posted by  John Covello  on 

Hello, Do Glass Doors count as windows and require automatic glare control?

1
Fri Dec 11, 2015, 12:51 pm

Prescriptive Method of Documenting - Floor Area (per bay)

NC-2009 IEQc8.1:Daylight and Views—Daylight
posted by  Michael Haugh  on 

First off, I have had a very hard time finding information to help complete this Credit's documentation.

1
Mon Mar 14, 2016, 6:09 pm

Prescriptive Method: skylight zones?

NC-2009 IEQc8.1:Daylight and Views—Daylight
posted by  Kash Boodjeh  on 

Hello, We are pursuing the Prescriptive Method for this credit, using both skylights and windows.

0

Daylighting Simulations

NC-2009 IEQc8.1:Daylight and Views—Daylight
posted by  Joel Jude Tadeo  on 

For a project that has multiple typical floors and a large area, is it allowable to simulate a typical floor and just multiply the non/daylit areas for documentation?

1
Wed Feb 22, 2017, 5:38 pm

Daylight calculations with Design Builder v3

NC-2009 IEQc8.1:Daylight and Views—Daylight
posted by  Felipe Duran  on 

Dear All, I am using Daylighting module of Design Builder V3 for IEQc8.1 daylight calculations and it gives very different results (less light) than the calculations conducted with Ecotect+Radianc

1
Thu Nov 17, 2011, 6:18 pm