If part of the building area passes at 9am but does not pass at 3pm does that mean we cant use that 9am area for that time.

Hello, I am documenting this credit using the simulation method. For many of the regularly occupied spaces, the rooms are above the 10fc requirement except for a small corner of the room.

Hello, Where would I find the Supplemental Daylight and Views Calculation Spreadsheet for v2009 (LEED Online states it's "found under 'Credit Resources'")? Thank you.

Hi Every one, Currently we are working for factory building project which has registered five months before under USGBC Rating system LEED 2009.

When working on leedonline for this credit, we are told to Download, complete and upload the Supplemental Daylight and Views Calculation Spreadsheet (found under "Credit Resources"). The problem is

Although the October 2013 Matrix, does not allow any patient rooms to be without daylighting/ views, I believe these rooms could be eliminated due to the nature of their process.

Should an area designated for hot desking be included as a regularly occupied area? No single user will spend more than one hour per day at these workstations.

I'm documenting this credit for an apartment building using the v3 supplemental daylight and views calculator.

We have a Wellness Center project with an indoor pool area of approximately 6,000 SF and a pool surface area of about 4,000 sf within that space.

Is it mandatory to run the model on Radiance when the model has been built up on Ecotect? I have been facing issues on installing Radiance because of my computer windowns version.