Hi All, Are baseline building rotations necessary for a new building that is connected to an existing building. Note that the new building is being modeled as a stand alone.

Dear all, We are doing a factory project in pakistan, which have a 1200 kw process machinery load, after energy modeling without process load we are saving 55 % from baseline but after adding proce

We are performing a review of an energy model for a project that is a major remodel of an existing space with addition of new square footage.

We are using Visual DOE 4.2 software for energy modeling and we are doing one LEED NC project, the project team is planning to do the automatic sensor control window shading device, and how to take

Question: Does the HVAC system for the baseline have to be the same type as the proposed design HVAC equipment? (ie.

Hi All, I am working on a LEED 2009 project based in Europe. I just wonder shall I use the latest utility rate in 2016 or the old one in 2010?

If we use option 2 for EAp2 can we use option 3 for EAc1 or do we need to be consistant throughout?

In my models (both proposed models and baseline models) the surfaces of the zones are from the inside edge of the external walls to the center of the internal partitions.

We are modeling a gym in Guatemala where we will have no heating or cooling system but will have mechanical ventilation.