I haven't energy modeled yet and am reviewing someone else's work on EAp2.

Dear All, We are modelling a Baseline Building with System 8 “VAV + PFP boxes” using HAP by Carrier. We are wondering how to model the VAV + PFP boxes according to ASHRAE 90.1 Section 3.1.3.14.

Dear All We have two projects that are attempting LEED 2009 NC Certification the first one is office building with server room and the second one is Arg Gallery.

If we convert district steam to hot water for space heating, is there any guideline on the efficiency (of heat exchanger) for baseline model?

Based upon G3.1.10 (d) “Where no cooling system exists or no cooling system has been specified, the cooling system shall be identical to the system modeled in the baseline building” Does this mean

Will LEED round up the saving percentage to the nearest integer? e.g. 19.8% to 20%? Thanks in advance

90.1 AppG G3.1.2.8 says the return/relief fan should be sized for max (SA-OA, 90%*SA) [cfm]. But in table 1.4. the allowable fan power is only based on the supply fan power.

I wonder if there is a rule on how much the difference between the actual and modeled floor area can be in LEED. Thanks

Hello. Apologies for posting on two credits but Scott Bowman rightfully suggested I re-post here. Regarding an ice cream manufacturing facility where we are managing the Cx process I have two queri

Hey everyone, I have a question about the best software choice and modeling strategy for water-source VRV (or VRF) systems.