The language of NC v4 does not specifically call out new wood. "Wood products must be certified by the Forest Stewardship Council or USGBC-approved equivalent.

Our Project is part of a Campus. Can we use the campus(regional) pond located outside our project boundary to achieve the rainwater management points for our project? The initial pond will be des

Hello, I am working in a DES heating and cooling thanks to sea water and I would like to know if it is taking in account as a non-roof measure.

Hi - It seems that this version of the rating system is targeting energy performance improvement over energy cost budget. Is that right?

Howdy! Can this credit be achieved if the project is on a former brownfield site - meaning that it was identified and already remediated by the previous owner? Many thanks!

Hi, The project is a 3-storey high building, single tenant. The tenant already occupies the building, and going to renovate about half of the floor area.

Under v3, if a project wanted to pursue the enhanced Cx credit, a third-party CxA was required, and that entity completed the activities for both the prerequisite and the enhanced credit. Have the

We received a LEED approved certificate concerning VOC emissions for Polyethylen Foam products.

In V3, the development boundary from water bodies and wetlands should be 50' and 100' respectively. Why in V4 it is reversed ie 100' for water bodies and 50' for wetland? Any justification?

Is there a off line calculator for "Total Water Use" yet?