See LEEDuser’s guidance on Healthcare-v4 EAp2 »
Post a question or comment
Credit Filters
Minimum energy performance
Filter by location
Forum
Topic
Replies
Recent
Default Avatar

ASHRAE 90.1-2010 Envelope mandatory requirements

Healthcare-v4 EAp2:Minimum energy performance
posted by  Ayesha Nakhwa  on 

Hi all,

As per ASHRAE 90.1-2010: 5.4.1 Insulation. Where insulation is required in Section 5.5 or 5.6, it shall comply with the requirements found in Sections 5.8.1.1 through 5.8.1.9.

2
Thu Dec 14, 2023, 3:53 pm

Under slab insulation required on raised heated (radiant) floor slabs?

Healthcare-v4 EAp2:Minimum energy performance
posted by  Deb Favaretto  on 

Our project is pursuing LEED BD+C for Healthcare v4. Under the Minimum Energy Performance prereq, it is stated that the building must comply with the mandatory provisions of ASHRAE 90.1 2010.

1
Wed May 18, 2022, 1:04 pm
Default Avatar

Energy Savings Approach using Appendix G

Healthcare-v4 EAp2:Minimum energy performance
posted by  Amal Venugopal  on 

Hi,

1
Thu Jun 3, 2021, 2:59 pm

Exterior slab with radiant heating

Healthcare-v4 EAp2:Minimum energy performance
posted by  Priscillia Champagne  on 

I am working on a project in Quebec (where there is a lot of snow) and the client has requested a radiant heating system for an exterior concrete slab that links a ramp to an ambulance garage

1
Tue Jan 14, 2020, 9:37 pm
Default Avatar

Energy Model Building Split

Healthcare-v4 EAp2:Minimum energy performance
posted by  Junaid Naseer  on 

Hi,

2
Profile picture for user sheffer
Marcus Sheffer
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Thu Feb 28, 2019, 2:21 pm
Default Avatar

Water Cooled Chiller Make Up Water Cost Baseline

Healthcare-v4 EAp2:Minimum energy performance
posted by  Junaid Naseer  on 

Hi,

1
Mon Feb 25, 2019, 11:35 pm
Default Avatar

Domestic Hot Water Baseline Equipment Type

Healthcare-v4 EAp2:Minimum energy performance
posted by  junaid naseer  on 

Dear All,

1
Tue Mar 6, 2018, 7:54 pm