See LEEDuser’s guidance on CS-2009 IEQc4.1 »
Post a question or comment
Credit Filters
Low-Emitting Materials—Adhesives and Sealants
Filter by location
Forum
Topic
Replies
Recent
Default Avatar

Basement carpark areas?

CS-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Scott McMillan  on 

As noted above the requirement is applicable to "All adhesives and sealants used onsite within the weather barrier".

5
Mon Sep 11, 2023, 7:00 am
Default Avatar

Limits for VOC content outside US, additional questions

CS-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Ernst Schriefl  on 

All the limits on VOC content provided in the LEED reference guide (2009 edition) are minus water (g/L minus water or g/L less water).

0
Default Avatar

Determing VOC content outside of US

CS-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Ernst Schriefl  on 

Yesterday we had a conversation with a US manufacturer who told us that the VOC content outside the US can also be determined according to the respective national requirements.

2
Profile picture for user Dave.Hubka_2
Dave Hubka
Practice Leader - Sustainability
EUA
LEEDuser Expert
510 thumbs up
Wed Apr 17, 2019, 3:42 pm
Default Avatar

Asphalt primer + SBS modified

CS-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Pawel Soszynski  on 

Hello,

0

Pipe insulation sealant???

CS-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Edgar Arevalo  on 

I'm trying to figure out, under what category would pipe insulation joint sealant fall under?

0

Putty with M1 emissions test, however VOC content unknown g/L

CS-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Sara Johansson  on 

Hello,

0
Default Avatar

Wall Putty VOC content measured in gram/kg

CS-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Kavita Gusain  on 

The test certificate for VOC content received from Laboratory for wall putty is in grams/kg, whereas LEED specifies the limit in grams/liter.

0
Default Avatar

Acrylic masonry sealer

CS-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Gabriela Hernández Castillo  on 

We have a product that is an "acrylic masonry sealer" with a VOC content of 81 gr/lt.

1
Tue Jul 17, 2012, 8:26 pm
Default Avatar

Low emitting materials in CS 2.0

posted by  javier bolanos zeledon  on 
1
Fri Jun 25, 2010, 2:41 am
Default Avatar

Paints or sealants applied before building is sealed

CS-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Patrice McVeigh  on 

Hi, If paints /sealants /adhesives are being applied on site but before the building has been enclosed do they still need to comply with the associated VOC limits?

1
Fri Apr 22, 2016, 9:42 pm