Forum quick links
Dynamic model compliance analysis results
CS-2009 EAp2:Minimum Energy Performanceposted by František Bartoš on
Hello, I made model using eQuest 3.65 and after simulation, baseline building generation and results compliance I see 55 % percent improvement in proposed design against the baseline design. This
Area clarification
CS-2009 EAp2:Minimum Energy Performanceposted by Magda Aghababyan on
Hi, We have Core & Shell project while calculating the area of the locations, Pif and EAp2 have difference approximately 4% please let us know what is the maximum percentage deviation. Thank y
Addenda to ASHRAE standards
CS-2009 EAp2:Minimum Energy Performanceposted by Jens Apel on
Edit: question has already been answered in February 2012 here: http://www.leeduser.com/credit/CI-2009/EAp2 Didn't find it before, sorry for any confusion. Dear all, on several spots in the Ref Gu
LEED DESv2, System 8 and Chilled Water Temp Reset
CS-2009 EAp2:Minimum Energy Performanceposted by Matt Humphreys on
For baseline HVAC system #8 modeled with purchased chilled water according to Option 1 of Treatment of District or Campus Thermal Energy in LEED v2 and LEED 2009 guideline, does the Chilled-Water S
Baseline systems for mixed use facility
CS-2009 EAp2:Minimum Energy Performanceposted by Kim Teachout on
We have a mixed use facility that is 34% hotel, 34% office, and 32% parking garage.
Baseline Ventilation
CS-2009 EAp2:Minimum Energy Performanceposted by Toni Herena Montull on
Dear all, our previous version of the baseline model in a C&S building had the same ventilation rates than the proposed.
Mandatory provision 6.4.1.1 Equipment efficiency.
CS-2009 EAp2:Minimum Energy Performanceposted by Sandra Holmström on
I have a question about Mandatory provision 6.4.1.1 Equipment efficiency. Our project is a LEED Core and Shell project and a retail centre, 500 000 foot2.
ASHRAE mandatory provisions
CS-2009 EAp2:Minimum Energy Performanceposted by Anna Korinkova on
I guess that it is a repetitive question but I need to be sure.
Energy Modeling for a Group Certification
CS-2009 EAp2:Minimum Energy Performanceposted by Susan Di Giulio on
We are working on an open-air shopping mall with 6 buildings arranged around a main "street". Some are attached and some aren't.
U-factor for existing masonry wall
CS-2009 EAp2:Minimum Energy Performanceposted by Morteza Kasmaei on
Hello All In this LEED_CS project, the existing masonry wall was changed to the following configuration (from outside to inside): - glass-fiber-reinforced concrete panels [TAKTL] on galvanized st