Trying to figure out if I need to and how/where to include values for pre-rinse spray valve use.

It is mentioned that well and pond water does not count for this credit. extracting water from onsite Aquifer using borehole can considered for this credit as the project will not be using any pota

We are working with a school that is struggling to meet the prerequisite given programming and district requirements.

Hi, We are working on a middle school that has 2, Home Economics classrooms with residential kitchen-style fixtures; I would assume these should be included within my calculation?

Dear all, A Contractor of a LEED project has been struggling to find dual flush 2/4 LPF WCs in Lebanon (the Middle East). Can someone please provide me with a list of suppliers who readily have 2

I received the final comment for one of my LEED for Schools projects: "Metered faucet duration has not been revised from 10-second duration to the default 12-second duration as required.

Dear all, The project has 2/4 LPF WC fixtures specified, and the water calculations done accordingly. The Contractor is suggesting a WC fixture with a maximum flush rate of 3/6 LPF, but with a reg

Above states "If your project is registered after the 11/1/2011 addenda release then the pre-rinse spray valve flow rate must be 1.6 gpm or less in order to comply with the prerequisite.

I am working on a school project and actualy calculating WEp1. I am wondering that the default fixture use for a school indicate no daly uses for a shower for students.

I was wondering if the LEEDuser team could provide an example of a completed template for a school project in the documentation toolkit.