Forum quick links
LEED and Safety Officer Duties and Responsibilities
CS-2009 MRc2:Construction Waste Managementposted by Ann E on
Hi,
I just want to clarify the difference between waste management (specially housekeeping) of LEED and Safety.
Conversion
CS-2009 MRc2:Construction Waste Managementposted by Ann E on
Hi'
Can someone help me how to convert our construction debris volume given in cubic meter to tons?
Every response related is very much appreciated. Thank you.
Clarifications on waste consideration from site office
CS-2009 MRc2:Construction Waste Managementposted by pradeep kumar on
Hi,
waste due to flooding
CS-2009 MRc2:Construction Waste Managementposted by Nicole Isk on
Dear LEEDers,
Tons vs Yards
CS-2009 MRc2:Construction Waste Managementposted by Kevin Short on
My waste hauler has given receipts in both tons and yards. I am using tons for the credit, is there some conversion factor I can use? The receipts in question are for landfill and wood.
Documentation of Comingled Waste
CS-2009 MRc2:Construction Waste Managementposted by Panupant Phapant on
If on site have some commingled waste , LEED Online form require us to provide supporting document. I wondering that what kind of this document? and What the topic are will involve in this?
Should I include demolition debris?
CS-2009 MRc2:Construction Waste Managementposted by Sandra Holmström on
I wonder if I need to include demolition debris if a former building at the project site was demolished for four years ago?
Bentonite mud/sludge
CS-2009 MRc2:Construction Waste Managementposted by Paola Figueiredo on
Hi, Bentonite mud used for filling in the foundation phase is normally sent to special landfills as hazardous waste, thus being excluded from MR2 calculations. However, there is a special treatme
Rebar - Offsite Scrap Recycling
CS-2009 MRc2:Construction Waste Managementposted by Roberto Meza on
Hello, We have an interesting situation at a large project, Rebar is being bought from a company which at the same time offers to bend it into the various figures needed for columns etc.